Showing posts with label convertible. Show all posts
Showing posts with label convertible. Show all posts

Friday, May 8, 2009

One Clean Cabriolet, check!

Two things are certain: (1) It's Friday! and (2) Today's subject is finally ready for some spring and summer roadtrips! It's me, Stephanie, writing again for the blog. After spending a couple of days at the Reggie's Motorworks Spa, it has been kept under our roof due to this rainy spell we've endured. According to tomorrow's forecast, it should be safe to deliver it to its owner, Sean. Finally! As you've witnessed over the past several weeks, Sean's cabrio has come such a long way since we first met her. It's time for a trip down memory lane...sit back, relax, and read on... If you would like a little review first, that's fine, take a look here, here, here, here, and here, then come back to this post for the grand finale.

Long, long ago, Reggie's first shop was in Lawrence, Indiana, in a pole barn occupied by various heating and air conditioning equipment and supplies, a few limousines, and other stuff that the owner had accumulated over the years. Reggie knew the owner through his previous career in the cellular industry. Another friend of Reggie knew he worked on ol' BMW's and gave him a call: a white convertible was on its way to the crusher, did he want to look at it? Reggie had another good friend, Sean, whom he thought might be interested in this car, even though it would need a little work. Ahem, make that a lot of work. Sean said "Yeah, that would be cool." So a deal was made that sealed the fate of this hunk of metal, destined to be just that...only crushed to tiny bits and pieces of metal. Plus, the car only had roughly 86,000 miles on the odometer. The car was towed to Reggie's shop. I remember looking at it thinking this was going to be quite a project. An expensive project at that! I mean, the seats and dash were covered in dirt, dust, and grime, just crumbling away. Trash and debris was strewn about the interior. The top was shredded. As for the paint, I could barely tell the car was supposed to be white. Then Reggie cleaned and buffed just a small section of the hood. Wow! There actually was a nice, clean car hidden underneath! Sean saw its potential too, more so than I did, thank goodness, and he was excited to add this car to his collection. Unfortunately, we don't have any photos in our archives of the car when she was unloaded from the tow truck. The ones we do have were taken once it was cleaned up a bit. The white pole barn in the background is where this all began. You'll notice too that the hood was bent - until Reggie fixed it!





The cabrio became driveable and somewhat presentable. Sean knew that one day he would want to get the interior back in shape, and take care of a few other odds and ends on the car. A couple years went by, and the cabrio was ok, but just not satisfactory. Not even close. Once winter hit, Sean brought his car back to the shop for her makeover. The carpets have been professionally cleaned, check! The seats have been treated with Leatherique's Rejuvenator Oil and Pristine Clean, check! The driver's seat was reconstructed from a white leather seat, re-dyed with Leatherique's Cardinal Red dye, check! And, the seat heater was reinstalled, check! The passenger seat was reconstructed as well from a donor seat with better leather and foam, check! The rust on the driver's side rear quarter panel was removed, repainted, renewed, check! The air-conditioning system has been updated and fully recharged, ready to battle the summer heat, check! The rust in the battery tray and under the grille was remedied and repainted, check! And, of course, this cabrio was treated to some pampering, a la Reggie's Motorworks Spa, check!





So after almost being hauled off for scrap, after all the poking, prodding, welding, cutting, grinding, painting, and cleaning, this cabrio is a true survivor! She's ready to shine, and will no doubt turn some heads on the road very soon, especially with her Euro smilies. Right now, she's got about 93,000 miles clocked, and we're sure she's bound for many, many more. We thought it would be very fitting and fun to get some proper photos of this pretty cabriolet...finally! Without further adieu...I am happy to present this 1988 BMW 325i in all her Alpine weiss glory!










































































We're very excited to get the keys to this great car back in her driver's hands. Sean has seen the car's progress, but seeing it totally done and ready to hit the pavement will be the icing on the cake. I'm thinking he may have to fight his wife and daughter to drive it first! Well, ok, his wife Kristen is allowed to drive, but Mason will have to wait 16 more years! Be sure to check it out at our Open House on Saturday, June 20th!



Friday, April 24, 2009

Rust Repair on our Rescue Convertible, and a New Shop Truck (Wagon)!

Hello all, Reggie here. This is MY first post. Kipp, my jack-of all trades (web-designer, T-shirt producer, eBay listing writer, and shipping guru) typically handles the blog, along with my wonderful wife/photographer, Stephanie. They have both been taking my experiences in the shop and bringing them to life here on the web.


I want to point out that I am NOT a "trained" professional. I am a former DIY guy that has decided to go "pro" simply meaning that I do this everyday and pay my bills by doing so. The processes I show/describe are ones that I have learned from reading, trying, and believe it or not....watching TV. Most of the projects you see me tackle on this blog are ones that I have done between 0 and 3 times prior. This being said, I can not be responsible for any "less than desired" results if you are using my blog as a how-to guide.

This week I've been doing more work on the 1988 325ic that belongs to my good friend Sean. Just a quick bit of history on this car:

I bought this car back in the summer of '06 for $300 and a scrap Mercedes-Benz 190e. The poor car was literally on the back of a wrecker on its way to be sold for scrap when my towing guy spotted it. He told the scraper that I may be interested in buying it, so brought it by and a deal was made. I purchased the car on Sean's Birthday, and he since happened to already have an '87 325is track car in the same color combo, it seemed like a sign that he should own it. It had around 86,000 miles on it, but it had sat outside for a long time. We've been piecing it back together ever since. We will be calling it done after this last extended stay at RMW, so you will see the final results next week.

For now, we have some rust repair to do!!

Here are the three areas I will be addressing: the battery tray (up front on a convertible)/frame rail, the top of the valance - just under the grille, and the left quarter panel - in front of the wheel and above the rocker.




First I remove the battery and any attached brackets/wiring to expose the majority of the damage:


Next I use a combination of wire wheels and sanding discs on die-grinders to remove most of the scaly rust.






Next I use "Rust Prep" to stop the rust in its tracks. The bottle in the photo is of a product that I have used with decent results, but in the later repairs you will see that I have switched to a Permatex brand product that I like much better. All of these do the same thing. They chemically convert the rust left behind into a black paint-ready surface that will not continue to corrode.







After reading the direction on these products, I find it is necessary to leave them for 24 hours before paint. For this particular project, I will be painting over the pitted metal, as the battery will be sitting on top of it. In an area that is more visible, I would top-coat with a body filler (or replace the bad metal) before painting.

Here are some photos of the prep work on the other areas. All of the work is similar, although the other areas will be sanded and smoothed out much more before paint.

Here is that panel below the kidney grille. As you can see it needed a bit of straightening before the rust could be removed. I sand this with 120, 220, then 400 grit papers to get a nice smooth finish to prime over.





Sadly, this area was "repaired" by a "professional" body man less than 8 months ago!! When I went to grind away the big bubble, water splashed me in the face. He just sanded it down a bit and spread some putty on it. As you can see in the photos, this was THROUGH rust that came from the back side. In my experience, you can get by with body filler on pitted rust if it starts on the exterior (if well-prepped), but if it's coming from the back it won't work at all.

Initially I thought I'd be able to weld these holes shut, but some prodding with my pick made it clear that the back of this metal was badly corroded and the rust would continue to eat away at this section.



At this point, it's time to start cutting, and I am out of time for posting.

In the meantime, what do you think of our new shop truck?! Its a 1980 Volvo 245 (wagon). It's got 342K on the clock, and has plenty of character. My decision to buy this old girl is part inspired by the "rat-rod" or survivor car scene, and part inspired by the fact that I see an awful lot of you e30 guys rolling up in Volvos to pick up your parts. I plan to keep this old beater pretty much as-is, aside from replacing some suspension/maintenance parts. This will hold me over until I have time to chop up an e30 for a pick-up truck project!!





Thanks for looking and have a great weekend!!